Thermo Scientific ES Serie Mode D'emploi page 13

In order to reverse the door please follow the below instructions. This should be carried out
by 2 people for safety purposes.
1. Tilt the refrigerator backwards by 45° and lean on a vertical, hard surface such as a wall.
2. Remove the feet from the bottom, right hand hinge (figures 1 and 2).
3. Remove the screws from the hinge (figure 3) and remove hinge.
Figure 1
4. Pull the door from the bottom to remove from the refrigerator.
5. Remove the top, right hand hinge (figure 4).
6. Install the hinge on the top, left hand side (figure 5).
7. Remove the bottom, left hand feet and base plate (figures 6 and 7).
Reversing the door
Figure 2
Figure 4
Figure 6
Figure 3
Figure 5
Figure 7
13