Transporting and moving your ES series refrigerator
The refrigerator must always be moved in the vertical position. The cabinet must not be tilted
anymore than 10°. In the event that the cabinet is tilted more than 10°, the power supply must
not be connected until the equipment has stood upright for at least 24 hours.
This equipment is cooled by energy-efficient R600a refrigerant. To keep running costs as low
as possible always:
• Position the equipment away from heat sources.
• Make sure the air can circulate freely around the equipment, don't block ventilation
grid.
• Ensure that products being stored are below room temperature upon entry.
• Make sure the door is opened as little as possible whilst in use and closed as quickly
as possible to prevent unnecessary temperature fluctuations.
The refrigerator contains environment-friendly, non ozone depleting refrigerant R600a. As
R600a is a flammable gas, it is important to avoid damage to the refrigeration circuit during
transport and installation. If the refrigeration circuit is damaged, avoid using a naked flame in
the vicinity of the refrigerator and connecting power to the refrigerator. Also make sure there
is good ventilation in the room. If you are in doubt please contact your supplier.
–
WARNING: Keep ventilation openings, in the equipment enclosure or in the built-in
structure, clear of obstruction.
–
WARNING: Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
–
WARNING: Do not damage the refrigerant circuit
This refrigerator has been designed and built with the intention of the product being used
within a Laboratory and is designed to store contents between +1°C to +10°C.
Please see below for specific product information:
Model Height
Width
(mm)
(mm)
151R
845
595
288R
1565
595
Energy saving tips
Important Information
Product Information
Depth
Weight
Refrigerant
(mm)
(Kg)
635
36
R600a
670
58
Ambient/Room
type
working
temperature
+10°C
to
+32°C
No. of
Door
shelves
Type
3
Solid
3
Solid
4