Publicité
Les langues disponibles
Les langues disponibles
7. INSTALLING THE BOTTLE OPENER
Parts Required:
1
x
Bottle Opener (#19)
Installation:
•
Remove the pre-installed screws for the Bottle Opener. Install the
bottle opener on the Front-Right Support Leg.
8. ASSEMBLING THE SIDE SHELF
Parts Required:
1
x
Side Shelf (#18)
3
x
Tool Hook (#D)
Installation:
•
Turn the side shelf upside down. On the edge of the side shelf with
three holes, install the tool hooks into each hole along the edge. The
tool hooks will secure to the nut that is pre-mounted on the inside.
9. MOUNTING THE SIDE SHELF
Parts Required:
4
x
Screw (#A)
4
x
Locking Washer (#C)
4
x
Washer (#B)
Installation:
•
From underneath, fasten the side shelf to the side panel of the main
barrel using four screws, locking washers, and washers.
NOTE: Do not tighten screws completely until all screws have been
installed. Once all screws are installed, then tighten securely.
IMPORTANT: Avoid using the shelves to move or lift the grill. The
weight of the unit will cause the shelves to break, which is not
covered by warranty.
10
1 x Bottle Opener (#19)
• Remove the pre-installed screws for the Bottle Opener.
Install the bottle opener on the Support Leg / Front.
Installation:
• Turn the side shelf upside down. On the edge of the side shelf with
three holes, install the tool hooks into each hole along the edge. The
tool hooks will secure to the nut that is pre-mounted on the inside.
3 X Tool Hook (#D)
7
19
8
18
9
Installation:
• From underneath, fasten the side shelf to the side panel of the main
barrel using four screws, locking washers, and washers.
NOTE: Do not tighten screws completely until all screws have been
installed. Once all screws are installed, then tighten securely.
IMPORTANT: Avoid using the shelves to move or lift the grill. The
weight of the unit will cause the shelves to break, which is not
covered by warranty.
D
D
D
A
C
B
Parts Required:
4 x Screw (#A)
4 x Locking Washer (#C)
4 x Washer (#B)
Publicité
