Publicité
Les langues disponibles
Les langues disponibles
Tip:
You can follow up the meat with a few small pieces of bread to clear any meat
remaining in the machine.
What should you do if the machine is clogged? (diagram 3)
Stop the mincer by pressing position "0" of the On/Off button F.
Then press the "Reverse" button G for a few seconds to release the jam.
Press position "I" of the On/Off button F to continue mincing.
Important: wait until the appliance has stopped completely before pressing the "On"
F or "R
verse" G button.
e
KEBBE ATTACHMENT (I)
Assembly (diagram 4):
Insert the feed screw A2 into the body A1 of the mincer head. Fit the kebbe making
end I1, locating the lug in the notch on the body A1 . Fit the ring I2 over the kebbe
making end and then screw by the nut A5 fully.
Fit the assembled mincer head on the motor unit H.
Note: this attachment is used without meat screen or cutter.
(depending on model)
BISCUIT MAKER ATTACHMENT (K)
Assembly (diagram 5):
Insert the feed screw A2 into the body A1 of the mincer head. Place the screw feeder
J locating up the lug in the notch on the body A1 Fit the mould K2 in the support K1
and place it on the screw feeder J. Screw the nut A5 home on the body A1 . Fit the
assembled mincer head on the motor unit H.
Note: this attachment is used without meat screen or cutter. The screw feeder
maintains the screw in position when you are preparing the recipe.
Using
Prepare the dough: You will obtain the best results with a slightly soft dough.
Choose the shape by lining up the arrow with the chosen shape. Keep feeding dough
until you have obtained the desired number of biscuits.
SAUSAGE FILLER TUBE (L)
This attachment, which can be fitted on the mincer head, enables you to make all
sorts of sausages that you can season to your taste.
11
Publicité
