Velleman DVM400 Serie Notice D'emploi page 15

10A
When measuring currents > 6A, max. 15s continuous measurement followed by a 15
minutes break between 2 measurements.
Overload Protection: 600mA range F0.63A/1000V– 10A range fuse F10A/1000V
9.5. Resistance
Range
600
6k
60k
600k
6M
60M
Note: in range 600Ω, short circuit test leads to determine lead resistance, than
subtract this value from the measured value.
9.6. Diode and audible continuity test
Range
Built-in buzzer sounds if resistance < 30Ω
Forward test current(DC): ± 1mA
Reversed test voltage: ± 1.5Vdc
9.7. Capacitance
Range
60nF
600nF
6µF
60µF
300µF
9.8. Temperature
Range
-55°C ~ 0°C
1°C ~ 400°C
401°C ~ 1,000°C
Note: thermocouple errors not included
9.9. Frequency
Range Resolution
99.99Hz
999.9Hz
9.999kHz
99.99kHz
999.99kHz
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use
of this device. For more info concerning this product and the latest version
of this user manual, please visit our website www.velleman.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced
to any electronic medium or otherwise without the prior written consent of the copyright holder.
Resolution
10pF <10nF: ±(5.0% of (rdg - 50 digits) + 20 digits)
>10nF: ±(3.0% of rdg + 10 digits)
100pF
1nF
10nF
100nF
Resolution
0.1°C
1°C
0.01Hz
0.1Hz
1Hz ±(0.1% of rdg + 3 digits)
10Hz
100Hz
10mA
Resolution
0.1
1
10
100
1k
10k
parameters
(5.0% of rdg +10 digits)
Accuracy
Logic
(1Hz~1MHz)
Accuracy
(0.5% of rdg + 3 digits)
(0.5% of rdg + 2 digits)
(1.5% of rdg + 5 digits)
Accuracy
Accuracy
±(5.0% of rdg + 4°C)
±(1.0% of rdg + 3°C)
±(2.0% of rdg)
Linear
(6Hz~10KHz)
±(0.05% of rdg + 8 digits)
N.A.