• Please read these instructions before operating the appliance
and retain for future use.
• Only use this appliance for the purposes described in the
instruction. The appliance is suitable for storing food.
• Only connect the appliance to alternate current, to an earthed
wall socket, with a mains voltage that corresponds with the
information provided on the information plate of the appliance.
• Do not use single/multiple adapters or extension cords.
• Do not use the appliance if the plug, cord or appliance are
damaged, or if the appliance no longer functions properly or if it is
damaged in any other way. If this is the case, consult the shop or
our technical service. Never replace the plug or cord yourself.
• The appliance must be moved and installed by two or more
persons.
• Be careful when moving the appliance to prevent the floor from
getting damaged.
• During installation, do make sure the power cable is not damaged.
• Check that the appliance is not placed too close to a heat source.
• In order to ensure proper ventilation, a free space of 10 cm should
be maintained around the appliance.
• Never cover the ventilation openings.
• Make sure the cooling pipes do not get damaged.
• Install the appliance on a sturdy, flat and stable surface.
• Install the appliance in a dry and well ventilated room. The
appliance is intended for use in a room where the ambient
temperature falls within the applicable class, depending on the
climate class found on the information plate on the back of the
appliance.
Climatic class
Ambient temperature
SN
From 10°C to 32°C
N
From 16°C to 32°C
ST
From 16°C to 38°C
T
From 16°C to 43°C
SAFETY INSTRUCTIONS - EN
EN - 16