ALFRA ROTABEST RB 35 B Mode D'emploi page 14

DECLARATION OF CONFORMITY
Manufacturer:
Official authorised entity for
compilation of the relevant technical
documentation:
Product:
Declaration of conformity:
We hereby declare that the aforementioned product complies with all relevant provisions of the Machinery
Directive 2006/42/EC. The protection objectives of the Low Voltage Directive 2014/35/EU are complied with
according to Appendix No. 1.5.1 of the Machinery Directive.
The aforementioned product thereby fulfils the requirements of the following relevant directives:
• Machinery Directive 2006/42/EC
• EMC Directive 2004/108/EC
• RoHS Directive 2011/65/EC
The following harmonised standards have been applied:
• EN ISO 12100:2011-03; Safety of machinery - General principles for design - Risk assessment and risk
reduction (ISO 12100:2010); German version EN ISO 12100:2010.
• DIN EN 62841-1:2016-07; VDE 0740-1:2016-07 - Electric motor-operated hand-held tools, transportable
tools, lawn machinery and garden machinery - Safety - Part 1: General Requirements
• DIN EN 62841- 62841-1:2018-08; VDE 0740-2.1:2018-08 - Electric motor-operated hand-held tools,
transportable tools, lawn machinery and garden machinery - Safety - Part 2-1: Particular requirements for
hand-held drills and impact drills
• DIN EN 60204-1:2019-06; VDE 0113-1:2019-06 - Safety of machinery - Electrical equipment of machinery -
Part 1: General Requirements
• DIN EN 60034-5:2007-09; VDE 0530-5:2007-09 - Rotating electrical machinery - Part 5: Types and degrees
of protection based on the overall design of rotating electrical machinery (IP code) - Classification
• DIN EN IEC 63000:2019-05; VDE 0042-12:2019-05 - Technical documentation regarding the assessment
of electrical devices and electronic devices with regard to the restriction of hazardous substances (IEC
63000:2016); German version EN IEC 63000:2018
• DIN EN 61000-3-2:2015-03; VDE 0838-2:2015-03 - Electromagnetic compatibility (EMC) - Part 3-2 Limiting
values - Limiting values for harmonic currents
• DIN EN 61000-3-3:2014-03; VDE 0838-3:2014-03 - Electromagnetic compatibility (EMC) - Part 3-3 Limiting
values - Limitation of voltage alterations, voltage fluctuations and flicker in public low-voltage supply
systems for devices with a rated current <= 16 A per conductor which are not subjected to a special
connection condition
• DIN EN 55014-1:2018-08; VDE 0875-14-1 - Electromagnetic compatibility - Requirements for household
appliances and devices, electric tools and similar electrical devices - Part 1: Interference immission
Hockenheim, 01.09.2021
14
Alfra GmbH
2. Industriestr. 10
D-68766 Hockenheim
Germany
Dr. Marc Fleckenstein, CEO, Alfra GmbH
2. Industriestraße 10
D-68766 Hockenheim
Germany
Metal Core Drilling Machine
ALFRA Rotabest RB 35B
18400
Dr. Marc Fleckenstein
(CEO)