Denon DJ SC5000M Prime Guide D'utilisation page 11

Operation
Main Display Overview
Performance View
Artist
Deck
Crates
Playlists/
History
Prepare List
Files
Search
Layer
Initial cue point
Loop on/off
Swipe left or right on the track overview to scan through the track while the track is paused.
Note: You can use this feature this during playback if Needle Lock is off. If Needle Lock is on and Motor is
on, stopping the platter with your hand or palm will allow you to swipe through the track overview. See
Configuration > Preferences
Spread or pinch your fingers on the waveform to zoom in or out of it, respectively. Alternatively, turn the
Select/Load knob.
Tap an icon to select it (e.g., the icons for Crates, Playlists, Prepare List, Files, or Search on the left side).
Tap a button to activate or deactivate it (e.g., the Quantize, Continue, or Key Lock buttons).
Tap the time to switch between the elapsed time and remaining time.
You can also show or hide the beat grid controls in Performance View. The beat grid is automatically detected
and set when the track is analyzed.
To show the beat grid controls, press and hold the Select/Load knob for a second. Six buttons will
appear at the bottom of the display, and the beat grid markers will appear on the waveform.
To reset the beat grid, tap Reset.
To shift the downbeats of the beat grid left or right (in one-beat increments), tap the < or > buttons,
respectively, or turn the Select/Load knob.
To freely shift/"slide" the beat grid left or right, move the platter.
To halve or double the number of beat grid markers, tap /2 or X2, respectively.
To hide the beat grid controls, tap Close.
Continuous
play on/off
Track
Quantize
on/off
Playhead
(track overview)
Auto-loop Time remaining/
length
to learn about Needle Lock.
Bars
elapsed
Beat counter
Loop
region
Playhead
elapsed
Track
tempo
Sync
state Track key
Hot cue markers
Key lock
on/off
Deck tempo
Pitch fader
range
Total pitch
adjustment
Waveform
Bar numbers
Pad functions
Track
overview
11