Gaggenau AC230101 Manuel D'utilisation Et Notice D'installation page 28

en Home Connect
To cancel the setting, press ⁠ .
a A signal tone sounds as soon as the selected set-
ting is saved.
7.15 Switching on the button tone
The button tones can be switched on.
Requirement: The appliance is switched off.
Press and hold ⁠ and
1.
a In the LED display, the LED for the setting that is
currently selected lights up.
Press ⁠ or ⁠ until LED 1 lights up in the LED dis-
2.
play.
To cancel the setting, press ⁠ .
3. To save the setting, press and hold
prox. three seconds.
Or wait approx. 10 seconds until the setting is
saved automatically.
a A signal tone sounds as soon as the selected set-
ting is saved.
Home Connect
8 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
If the appliance is not connected to your home net-
work, it functions as an appliance with no network con-
nection and can still be operated via the display.
Tip: Please also follow the instructions in the
Home Connect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 22
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡ In networked standby mode, the appliance requires
a maximum of 2 W.
¡ If you need your device's MAC address to connect
to your home network, you can find this next to the
rating plate. → Page 33
28
⁠ for approx. three seconds.
⁠ and for ap-
7.16 Switching the button tone off
The button tones can be switched off.
Note: Signal tones for the appliance are always
switched on and cannot be switched off.
Requirement: The appliance is switched off.
1. Press and hold ⁠ and
a In the LED display, the LED for the setting that is
currently selected lights up.
Press ⁠ or ⁠ until LED 2 lights up in the LED dis-
2.
play.
To cancel the setting, press ⁠ .
To save the setting, press and hold
3.
prox. three seconds.
Or wait approx. 10 seconds until the setting is
saved automatically.
a A signal tone sounds as soon as the selected set-
ting is saved.
8.1 Setting up Home Connect
Requirements
¡ The appliance is switched off.
¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡ The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
Download the Home Connect app.
1.
Open the Home Connect app and scan the follow-
2.
ing QR code.
Follow the instructions in the Home Connect app.
3.
8.2 Resetting the connection
Saved connections to the home network and to
Home Connect can be reset.
Press and hold ⁠ and
▶
LED display.
a An audible signal sounds.
8.3 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of op-
timisation, troubleshooting or security updates.
To do this, you must be a registered Home Con-
nect user, have installed the app on your mobile device
and be connected to the Home Connect server.
⁠ for approx. three seconds.
⁠ and for ap-
⁠ until LED 7 goes out in the