Siemens TI905 Serie Mode D'emploi page 17

To change the settings for the
4.
selected drink
~ "Adjusting beverage settings"
on page 17
To begin dispensing the drink, press
5.
the rotary selector.
Hot water is dispensed into the cup.
To prematurely stop dispensing
Note:
the drink, press the rotary selector
again.
Button Function
Selecting the coffee
"
strength, ground coffee
milk Milk/coffee mixing ratio
Cup size
ml
Two cups at once
#
Navigation Water temperature*
button, left
Navigation aromaIntense*
button, right
* Only available in "barista mode"
The appliance is set to "barista mode"
by default. Additional values can
therefore be set using the two
navigation buttons. "Barista mode" can
also be switched off. ~ "Menu
settings" on page 21
The factory settings are shown in
orange on the display. The currently
selected settings are backlit.
Adjusting beverage settings
Once you have selected a drink, you
can adjust certain values depending on
the drink. To do so, please use the
following buttons and the rotary
selector:
Selection
very mild*
■
mild
■
mild +*
■
normal
■
normal +*
■
strong
■
strong +*
■
very strong
■
Setting share of milk in %
(only for coffee drinks with milk)
Adjustment of the volume in ml increments.
Not available for ristretto.
Place two cups under the outlet.
e.g. for tea drinks:
> 70°C (white tea)
■
> 80°C (green tea)
■
normal
■
intense
■
Adjusting the coffee strength or
selecting ground coffee
A coffee drink is selected.
Press the " button.
1.
Use the rotary selector to set the
2.
coffee strength or select ground
coffee.
Press the "button or the rotary
3.
selector to confirm.
Operating the appliance en
very strong +*
■
extra strong
■
aromaDoubleShot
■
strong
aromaDoubleShot
■
strong +
aromaDoubleShot
■
strong ++*
Ground coffee
■
> 85°C (rooibos tea)
■
> 90°C (black tea)
■
> 97°C (fruit tea)
■
intense +
■
17