en Preventing material damage
Preventing material dam-
Pre v e nting m a te ria l da m a ge
age
Follow these instructions to prevent
Pre v e nting m a te ria l da m a ge
material damage to your appliance,
accessories or other objects in your
kitchen.
ATTENTION!
¡ Contamination with oil or fat may
cause plastic parts and door seals
to become porous.
▶
Keep plastic parts and door
seals free of oil and grease.
¡ Using the base, runners or appli-
ance doors as a seat surface or
climbing surface may damage the
appliance.
▶
Do not stand or support yourself
on the base, runners or doors.
Environmental protection
Env ironm e nta l prote c tion a nd s a v ing e ne rgy
and saving energy
Help protect the environment by us-
Env ironm e nta l prote c tion a nd s a v ing e ne rgy
ing your appliance in a way that con-
serves resources and by disposing of
reusable materials properly.
Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
▶
Sort the individual components by
type and dispose of them separ-
ately.
Information about current disposal
methods are available from your
specialist dealer or local authority.
38
Saving energy
If you follow these instructions, your
appliance will use less power.
Selecting the installation location
Follow these instructions when in-
stalling your appliance.
¡ Keep the appliance out of direct
sunlight.
¡ Install the appliance as far away
as possible from heating ele-
ments, cookers and other heat
sources:
– Maintain a 30 mm clearance to
electric or gas cookers.
– Maintain a 30 cm clearance to
oil or solid-fuel cookers.
The appliance needs to cool less
frequently at low ambient temper-
atures.
¡ Do not cover or block ventilation
openings.
¡ Ventilate the room daily.
The air on the back wall of the ap-
pliance can escape more easily
and the appliance does not warm
up so intensely.
The appliance must cool less fre-
quently.
Saving energy during use
Follow these instructions when using
your appliance.
Note: The arrangement of the fittings
does not affect the energy consump-
tion of the appliance.
¡ Do not cover or block ventilation
openings.
The air on the back wall of the ap-
pliance can escape more easily
and the appliance does not warm
up so intensely.