BorMann PRO BSS5300 Mode D'emploi page 7

EN
Description of main operation
Risk of injury: Always secure the workpiece in such a manner that it cannot move while being machined.
Observe the following instructions:
- The sanding capacity and quality are mainly dependent on the selection of the correct abrasive.
- Hold the machine with two hands, one on the motor housing and one on the gear head.
Sanding applications
● 9000-10000/min
Sanding with maximum abrasion.
Sanding off old paint.
Sanding of wood and veneered surface prior to paintwork.
Intermediate sanding of paintwork on surfaces.
● 8000-9000/min
Sanding thinly applied undercoat.
Sanding wood with sanding cloth.
Edge breaking on wooden parts.
Smoothing primed wooden surfaces.
● 7000-8000/min
Sanding solid wood and veneered edges.
Sanding rebate of windows and doors.
Intermediate sanding of paintwork at edges.
Light sanding of natural wood windows using sanding cloth.
Smoothing wooden surfaces using sanding cloth before staining.
Rubbing or removing excess limestone residue using sanding cloth.
● 6000-7000/min
Intermediate sanding of paintwork on stained surfaces.
Cleaning natural wood window rebate using sanding cloth.
● 4000-6000/min
Sanding stained edges. Sanding of
thermoplastics.
CAUTION! This product has been marked with a symbol relating to removing electric and electronic waste. This means that this product shall not
be discarded with household waste but that it shall be returned to a collection system which conforms to the European WEEE Directive. Contact
your local authorities or ask for advice on recycling. It will then be recycled or dismantled in order to reduce the impact on the environment.
Electric and electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances.
7
WWW.NIKOLAOUTOOLS.COM