BorMann PRO BSS5300 Mode D'emploi page 6

EN
Attaching sanding accessories
The suitable sand paper and sanding cloth can be attached quickly and simply to the sanding pad.
Press the self-adhesive sanding accessory onto the sanding pad.
In the case of a weakening adhesive effect of the sanding paper surface, the sanding
pad accessories, in particular those which are not yet touching the work piece, may
come loose from the sanding pad and cause injuries. Replace the sanding pad!
Dust extraction
WARNING! Dust hazard
Dust can be hazardous to health. Always work with a dust extractor.
Always read applicable national regulations before extracting hazardous dust.
The power tool is not equipped with an extractor unit. At the extractor connector, a mobile dust
extractor with an extraction hose diameter of 40 mm should be connected.
Recommendation: Use an antistatic suction hose. This helps reduce the electric charge.
6
WWW.NIKOLAOUTOOLS.COM