Publicité
Les langues disponibles
Les langues disponibles
Assembly - Assembling the Fan without the Light Kit
1
Assembling the fan without light kit
□
Remove the three light kit mounting screws (QQ) on the side
of switch cup cover (L).
□
Position the switch cup cover (L) onto the switch cup. Make
sure the notch in the switch cup cover (L) clears the reversing
switch in the switch cup of the fan-motor assembly (F), and
reinstall the light kit mounting screws (QQ).
Operation
Turn on the power and check the operation of the fan. The pull
chain controls the fan speeds as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off
The appropriate speed settings for warm or cool weather depends
on factors such as the room size, ceiling height, and number of
fans.
The slide switch (XX) controls the direction of the blades:
Forward (switch left) or Reverse (switch right).
NOTE: Wait for the fan to stop before reversing the direction of
blade rotation.
A. Warm weather - (Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a warmer setting
without affecting your comfort.
B. Cool weather - (Reverse) An upward airflow moves warm air off
of the ceiling. This allows you to set your heating unit on a cooler
setting without affecting your comfort.
L
xx
xx
14
F
QQ
A. Warm weather
B. Cool weather
Publicité
