Publicité
Les langues disponibles
Les langues disponibles
Assembly - Hanging the Fan (continued)
2
Hanging the fan
WARNING: The hook (OO) is only to balance the fan while
making the electrical connections. Failure to hang as shown
may result in the hook (OO) breaking, causing the fan to fall.
The hook must pass from the inside to the outside of the
canopy.
WARNING: When hanging the fan on the hook (OO) it is
critical that you use one of the non-slotted (round) holes in
the canopy (C).
□
Carefully lift the fan-motor assembly (F) up to the slide-on
mounting bracket (A).
□
Insert the ball portion of the ball/downrod assembly into the
socket of the slide-on mounting bracket.
□
Turn the ball/downrod assembly clockwise until it is seated
with the tab of the slide-on mounting bracket aligned with the
slot in the ball.
□
If using close-to-ceiling mounting, hang the fan on the hook
provided by utilizing one of the round holes at the outer rim of
the ceiling canopy (C).
OO
Standard mount.
A
B
C
D
E
F
Close to ceiling mount.
A
C
D
F
3
Connecting the safety cable
□
Turn the J wood screw (HH) into the ceiling.
□
Place the looped end of the safety cable (P) onto the J wood
screw (HH) and then tighten the screw firmly, or connect the
safety cable directly to the outer joist or mounting bracket (A).
HH
P
9
Please contact 1-855-HD-HAMPTON for further assistance.
A
HOMEDEPOT.CA
Publicité
