Publicité
Les langues disponibles
Les langues disponibles
Assembly - Attaching the Light Kit
1
Attaching the light kit
WARNING: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove the three screws (QQ) from the light kit fitter
assembly (G).
□
Connect the wires exiting the bottom of the motor assembly
(F) by connecting the molded adaptor plugs together (blue to
blue, and white to white).
□
Slide the light kit (G) and secure it to the switch housing
using the three screws (QQ) that were removed in the first
step.
2
Attaching the glass shades
and bulbs
CAUTION: Make sure the power is off before attaching or
removing the glass shade.
WARNING: Allow the bulb to cool completely before removing.
□
Remove the compressing ring (MM) from the threaded socket
of the light kit (G) by turning the compressing ring (MM)
counterclockwise until it unlocks.
□
Insert the glass shade (H) into the light kit cowling and turn
the compressing ring (MM) clockwise to tighten and secure
the glass shade. Repeat for the remaining shades.
□
With power off, screw the LED bulbs (K) into the sockets.
□
Attach the pull chain extensions (BB) to the light pull chain
and fan pull chain.
13
Please contact 1-855-HD-HAMPTON for further assistance.
F
QQ
G
F
G
H
MM
BB
K
HOMEDEPOT.CA
Publicité
