EINHELL BT-VC 1450 SA Mode D'emploi page 11

Anleitung_BT_VC_1450_SA_SPK1:_
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage: 230 V ~ 50 Hz
Power input: 1,400 watts
Max. power consumption of the automatic socket-
outlet: 2,200 watts
Max. total power consumption: 3,600 watts
Container volume:
Weight:
5. Before starting
Important!
b Before you connect the appliance to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
b The appliance may only be connected to a shock-
proof socket.
5.1 Assembling the appliance
5.1 Appliance assembly
Fitting the wheels (Fig. 4-11/13)
Place a split pin for fitting the wheels (31) through the
appropriate hole in the axle (33) and fit a washer (30)
and a wheel (13) to the axle (33) (Fig. 5-6). Now
slide the axle (33) through the guides provided for it
on the underside of the tank (10) (Fig. 7). Fit the
second wheel (13) to the empty end of the axle (33)
and secure it with the other washer (30) and the split
pin (31) (Fig. 8-10). Push the covers (32) on to the
outside of the wheels (13) so that the detents
engage on the covers (32) for the wheel (13). (Fig.
11).
Fitting the castors (Fig. 12/12)
Fit the castors (12) into the appropriate mountings on
the underside of the tank (10). Push the castors (12)
firmly into the mounting until they engage with a
clicking noise (Fig. 12).
Fitting the handle (Fig. 13/1)
Place the handle (1) into the handle holders (16) and
secure the handle with the supplied screws (34) as
shown in figure 13.
27.06.2007 11:48 Uhr
Fitting the appliance head (Fig. 14/5)
The appliance head (5) is fastened to the container
(10) by the locking hook (18). To remove the
appliance head (5), open the locking hook (18) and
remove the appliance head (5). When fitting the
appliance head (5), make sure that the locking hook
(18) locks into place correctly.
5.2 Fitting the filter
Important!
Never use the wet and dry vacuum cleaner without a
filter.
Check that the filter is securely fitted at all times.
50 l
Fitting the foam filter (Fig. 16/25)
10 kg
For wet vacuuming, slip the supplied foam filter (25)
over the filter basket (Fig. 2/20). The pleated filter (24)
already fitted upon delivery is not suitable for wet
vacuuming.
Fitting the pleated filter (Fig. 17/24)
For dry-vacuuming, slip the pleated filter (Fig. 3/24)
over the filter basket (Fig. 2/20). The pleated filter (24)
is suitable for dry-vacuuming only.
5.3 Fitting the tank bag (Fig. 3/35)
Fit the tank bag (35) as shown in Fig. 18.
5.4 Fitting the suction hose (Fig. 3/9)
Connect the suction hose (9) to the corresponding
connector on the wet and dry vacuum cleaner,
depending on the application required.
Vacuuming
Connect the suction hose (9) to the suction hose
connector (8).
Blowing
Connect the suction hose (9) to the blow connector
(19).
To extend the suction hose (9) you can attach one or
more of the elements which make up the 2-part
suction tube (17) to the suction hose (9).
Air regulator (Fig. 3/29)
The air regulator (29) can be fitted between the
suction hose (9) and the suction tube (17). The
suction power of the nozzle can be infinitely adjusted
using the air regulator (29).
5.5 Suction nozzles
Dual-purpose nozzle (Fig. 3/14)
The dual-purpose nozzle (14) is for vacuuming solids
and liquids over medium to large areas.
Seite 11
GB
11