Publicité
Les langues disponibles
Les langues disponibles
English
10
Guest profile
Your machine is equipped with a guest profile. When the guest profile is selected, the profile icon is
off. When you select this profile, you can still personalize the settings to your own preference but
the recipes you brew will not be stored.
Adjusting machine settings
Setting the water hardness
We advise you to adjust the water hardness setting to the water hardness level in your region for
optimal performance and a longer lifetime of the machine. This also prevents you from having to
descale the machine too often. The default water hardness setting is 4: hard water.
Use the water hardness test strip supplied in the box to determine the water hardness in your
region:
1 Immerse the water hardness test strip in tap water or hold it under the tap for 1 second (Fig. 17).
2 Wait 1 minute. The number of squares on the test strip that turn red indicate the water hardness
(Fig. 18).
Set the machine to the correct water hardness:
1 Tap the Settings
the OK icon to confirm.
2 Use the up and down arrows to select the water hardness level. The number of red squares
selected on the display should be the same as the number of red squares on the test strip (Fig.
19).
3 When you have set the correct water hardness, tap the OK icon to confirm.
Adjusting grinder settings
You can change the coffee strength with the grind setting knob inside the bean container. The
lower the grind setting, the finer the coffee beans are ground and the stronger the coffee. There
are 12 different grind settings you can choose from.
The machine has been set up to get the best taste out of your coffee beans. Therefore we advise
you not to adjust the grind setting until you have brewed 100-150 cups (approx. 1 month of use).
You can only adjust the grind settings when the machine is grinding coffee beans. You need to
brew 2 to 3 drinks before you can taste the full difference.
Do not turn the grind setting knob more than one notch at a time to prevent damage to the
grinder.
1 Place a cup under the coffee dispensing spout.
2 Open the lid of the coffee bean hopper.
3 Tap the espresso icon and then press the start/stop
4 When the grinder starts grinding, press down the grind setting knob and turn it to the left or
right. (Fig. 20)
icon and use the up and down arrows to select 'Water hardness'. Then press
button.
Publicité
