Warn PN74644 Instructions D'installation page 5

VII. MAINTENANCE/CARE
•
Inspect all metal parts and related hardware. Replace all parts that appear corroded, cracked or
deformed prior to use.
•
Inspect all nuts and bolts and related hardware prior to each use. Tighten all nuts and bolts that appear to
be loose. Stripped, fractured, or bent bolts or nuts need to be replaced immediately.
•
Check skid plates protecting moving or rotating parts of the vehicle . Remove debris that may inhibit the
part from moving freely. Removal of aluminum armor may be necessary to thoroughly clean and inspect
both the vehicle and the aluminum underbody components. Frequency of removal will depend on the type
of terrain conditions experienced. Regular cleaning will help keep product looking good and will help avoid
damage to related components.
VIII. TROUBLE SHOOTING
Contact Warn customer service with installation issues, comments, concerns, and
questions.
WARN INDUSTRIES
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
WARN INDUSTRIES, INC
Customer Service Department
12900 SE Capps Road
Clackamas, OR 97015
1-800-543-WARN (1-800-543-9276)
1-503-722-3005 International Fax
www.warn.com
PAGE 5 74645A0