Warn PN74644 Instructions D'installation

Your safety, and the safety of others, is very important. To help you make informed decisions about
safety, we have provided installation and operating instructions and other information on labels and in
this guide. This information alerts you to potential hazards that could hurt you or others. It is not
possible to warn you about all potential hazards associated with this product, you must use your own
good judgment.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT
DAMAGE. READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING
INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
This guide identifies potential hazards and has important safety messages that help you and others avoid
personal injury or death. WARNING and CAUTION are signal words that identify the level of hazard.
These signal words mean:
WARNING signals a hazard that could cause serious injury or death, if you do not follow
recommendations.
do not follow recommendations.
This guide uses NOTICE to call attention to important mechanical information, and Note: to emphasize
genera l information worthy of special attention.
Failure to observe these instructions could lead to severe injury or death.
Alwa a a a a ys ys ys ys ys Read all warning labels before operating. Alw Alw
Alw Alw
Alw Alw Alwa a a a a ys ys ys ys ys use extreme caution when drilling on any vehicle. Make sure that all fuel lines, brake lines, electrical wires, and other
Alw Alw
objects are not punctured or damaged when/if drilling on the vehicle. Thoroughly inspect the area to be drilled (on both sides of
material) prior to drilling, and relocate any objects that may be damaged. Failure to inspect the area to be drilled may result in
vehicle damage, electrical shock, fire or personal injury.
Alw Alw Alwa a a a a ys ys ys ys ys wear safety glasses when installing this kit. A drilling operation will cause flying metal debris.
Alw Alw
Alw Alw Alwa a a a a ys ys ys ys ys use extreme caution when cutting and trimming during fitting. Alw Alw
Alw Alw Alwa a a a a ys ys ys ys ys remove jewelry and wear eye protection. Alw Alw
Nev v v v v er er er er er lean over battery while making connections. Ne Ne Ne Ne
Alwa a a a a ys ys ys ys ys insure components will remain secure during installation and operation. Alw Alw Alw Alw
Alw Alw Alw Alw Alwa a a a a ys ys ys ys ys tighten all nuts and bolts securely, per the installation instructions.
Alw Alwa a a a a ys ys ys ys ys inspect, tighten, and replace damaged hardware before use. Alw Alw Alw
Alwa a a a a ys ys ys ys ys replace all worn or damaged parts before operating. Alw Alw Alw Alw
Ne Ne Ne Nev v v v v er er er er er operate this WARN product with damaged or missing parts. Ne
Nev v v v v er er er er er work under vehicle before properly securing vehicle. Ne Ne
Ne Ne
• Product may affect airflow to vehicle engine and drivetrain components.
• Installation of this accessory may affect vehicle warranty.
• This product will NOT protect vehicle from all impacts and terrain conditions.
WARN INDUSTRIES
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
INSTALLATION INSTRUCTIONS
A-Arm Guards, Rear
Application: Arctic Cat Prowler 2006-2007
CAUTION signals a hazard that may cause minor to moderate injury, if you
WARNING
INJURY HAZARD
NOTICE
PAGE 1
Part Number: PN74644
74645A0