ETNA KIF160 Serie Mode D'emploi page 68

OPERATION
Changing preset cooking time
The cooking time can be changed anytime during the operation.
1. Touch a cooking zone selection key, to select the active cooking zone for which you want to
change the timer.
The blinking timer indication next to the cooking zone power level indicates the active
▷
cooking zone.
2. Touch the timer key.
3. Touch within 5 seconds the plus (+) and minus (-) keys to change the time.
If the time is not modified in 5 seconds since touching the keys, the original cooking
▷
time will remain unchanged.
Checking remaining cooking time
The timer displays shows the remaining time from the cooking zone for which the point adjacent
to the power level is flashing. When more than one cooking timers are set, the shortest time set
will be visible in the display.
1. Touch a cooking zone selection key, to select the active cooking zone for which you want to
check the remaining time.
The blinking timer indication next to the cooking zone power level indicates the active
▷
cooking zone.
The timer will display the remaining time of the selected cooking zone.
▷
Switching off the timer
If you want to switch off the timer prior the end of preset time:
1. Touch a cooking zone selection key, to select the zone of which you want to switch off the
timer.
▷ The blinking timer indication next to the cooking zone power level indicates the active
cooking zone.
2. Touch the timer key.
3. Touch the minus (-) key and plus (+) key simultaneously to switch off the timer.
The timer indication light next to the cooking zone power level goes off.
▷
EN 14