Napoleon PT450RB-INFRARED Mode D'emploi page 6

LIGHTING INSTRUCTIONS
Ensuring all burner controls
Main Burner
Lighting
Turn left burner
control to high
position.
Press and hold
igniter button
until lit, or light
by match.
If ignition is not
immediate, turn
burner control
off. Wait 5
minutes.
With left burner
operating on
high, turn the
centre burner to
high.
The propane cylinder is equipped with an excess flow device. Unless
all burners are turned off prior to turning the cylinder on, only small
flames and low heat will be achievable.
Do not use back burner while operating main burner.
6
Open lid.
are in the off position,
slowly turn on the gas
supply valve.
Main Infrared
Burner Lighting
Turn infrared
burner control to
high position.
Press and hold
igniter button
until lit, or light
by match.
If ignition is not
immediate, turn
burner control
off. Wait 5
minutes.
LIGHTING
HOLE
LEFT
IGNITER
BURNER
Rear Burner
Lighting
Remove
warming rack.
Turn rear burner
control to high
position.
Press and hold
igniter button
until lit, or light
by match.
If ignition is not
immediate, turn
burner control
off. Wait 5
minutes.
REAR
BURNER
INFRARED
CENTRE
BURNER
BURNER
Side Burner
Lighting
(optional)
Open burner
cover.
Turn side
burner control
to high position.
Turn igniter
knob clockwise
several times or
light by match.
If ignition is not
immediate, turn
burner control
off. Wait 5
minutes.