Skil PWR CORE 20 PM4912B-00 Guide D'utilisation page 6

2 x 20v 18''
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Do not mow slopes greater than 15 degrees, as shown on the slope gauge.
Do not mow on wet grass. Unstable footing could cause slipping.
Service
WARNING
could expose moving parts or allow objects to be thrown and could increase the risk of injury.
For safety protection, frequently check all components and replace damaged components
immediately with identical replacement parts. Contact SKIL Customer Service for assistance.
Do not wash the mower with a hose; Avoid getting water in the motor and electrical
connections.
Before cleaning the machine, turn the motor off and wait until the blade comes to a complete
stop, then remove the battery pack. The cutting blade continues to rotate for a few seconds
after the motor is shut off. Never place any part of the body in the blade area until you are
sure the blade has stopped rotating. Then unclog the chute or remove or replace the grass
bag, or mulching insert.
Follow instructions for lubricating and changing accessories.
Keep handles dry, clean and free from oil and grease.
To reduce a fire hazard, keep the motor cover free of grass, leaves and debris build-up.
Check the blade and motor mounting bolts at frequent intervals for proper tightness. Also,
visually inspect the blade for damage (e.g., bending, cracking and wear.). Replace the blade
only with the identical replacement blade.
Maintain your mower with care – keep the mower blade sharp and clean for the best and
safest performance. Mower blades are sharp and can cut. Wrap the blade or wear gloves
and use extra caution when servicing it.
Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.
Never remove or tamper with safety devices. Regularly check their proper operation.
Never do anything to interfere with the intended function of a safety device or to reduce the
protection provided by a safety device.
After striking a foreign object, stop the motor, remove the battery pack, allow the blade to
stop rotating, and thoroughly inspect the mower for any damage. Repair the damage before
operating the mower.
Remove the battery and store the idle lawn mower in a covered area when not in use. Allow
the motor to cool before storing it in any enclosure. The lawn mower should be stored in a
dry, high, or locked-up enclosure, out of reach of children.
Maintain or replace safety and instruction labels, as necessary.
Do not incinerate the appliance even if it is severely damaged. The batteries can explode in a
fire.
When servicing, use only identical replacement parts. Use of parts that do not meet the
original equipment specifications may lead to improper performance and compromised
safety.
SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others
who may use this tool. If you lend this tool to someone else, also lend these instructions to
them to prevent misuse of the product and possibly injury.
6
Grass bag components, the discharge cover, side discharge chute,
mulching insert and trailing shield are subject to wear and damage, which
SAVE THESE INSTRUCTIONS!

Publicité

Table des Matières
loading

Table des Matières