Troubleshooting - Skil PWR CORE 20 PM4912B-00 Guide D'utilisation

TROUBLESHOOTING

Problem
The mower fails to
start.
The mower cuts
unevenly.
Cause
1. The battery packs are depleted.
2. One or both battery packs are not
properly inserted.
3. One or both battery packs, or the
mower are too hot.
4. The safety key is not inserted or
is not in the "1" position.
5. The side rails are not extended
to their maximum length and the
clamps are not locked in position.
6. The handle is set at storage
position.
7. The mower deck is clogged with
grass and debris.
1. The blade is dull.
2. The cutting height is not set
properly.
3. The blade is assembled
incorrectly.
Remedy
1. Charge the battery packs.
2. Attach the battery packs to
the mower. Press on each
battery pack until you hear a
click.
3. Turn off the mower and
remove the battery packs
from the mower. Allow
the battery packs and the
mower to cool down.
4. Insert the safety key and
turn it to "1" position.
5. Fully extend the handle and
lock both clamps.
6. Adjust the handle to one
of the three operating
positions.
7. Turn off the mower and
remove the battery pack
from the mower. Clean the
mower deck and make
certain that the blade has
freedom of movement.
1. The blade is dull.
2. Move the deck height to a
higher setting.
3. Reassemble the blade,
following the section
"INSTALLING THE BLADE"
in this manual.
27