Skil PWR CORE 20 PM4912B-00 Guide D'utilisation page 14

Set the Handle to the Upper, Middle or Lower Operating Position:
a. Pull the two handle-adjustment knobs outward while turning them 90° counterclockwise or
clockwise to the unlock position (Fig. 3).
b. Lift the handle with one hand, then gently pivot the handle to select one of the desired
operating positions – Upper, Middle, or Lower. (Fig. 4)
NOTICE: Taller users may prefer the upper operating position.
c. Turn the two handle-adjustment knobs back to the locked position (Fig. 3) and make sure
that the lock pin has been engaged in the desired operating position.
Fig. 3
LOCK
Handle-adjustment knob
d. Open the two handle-locking clamps and
fully extend the side rails. Securely close the
two handle-locking clamps. (Fig. 5)
NOTICE: The motor cannot be started
unless:
The side rails are fully extended.
•
Both handle-locking clamps are securely
•
closed.
The handle is not located at the storage
•
position.
14
UNLOCK
Fig. 4
Fig. 5
handle-locking
clamps