Original Prusa XL Mode D'emploi page 23

ÉTAPE 7 Detaching the Nextruder
Hold the Nextruder during disassembly.
Untighten two M3x12bT screws using a T10 Torx key.
Detach the Nextruder and place it nearby, we will rebuilt it in the next steps.
ÉTAPE 8 Still no sweets?
Mise à niveau de l'Original Prusa XL Mono-outil vers Cinq têtes
3. Detaching the Nextruder
Please don't open the bag yet.
But you are getting close to your
first taste ;).
23