Original Prusa XL Mode D'emploi page 20

ÉTAPE 1 Tools necessary for this chapter
ÉTAPE 2 Wi-Fi antenna detaching
20 Mise à niveau de l'Original Prusa XL Mono-outil vers Cinq têtes
3. Detaching the Nextruder
For this chapter, please prepare:
T10 Torx key (T10 Torx screwdriver)
2.5mm Allen key
This step is only for the printer,
which has a Wi-Fi antenna on the
back of the printer.
Turn the printer, so the back side of
the printer is facing you.
Unscrew the Wi-Fi antenna from
the antenna connector and place it
nearby.