DURAVIT SensoWash Starck f Notice D'utilisation page 54

4.5 Pairing remote control with shower toilet
Activate the pairing mode with the remote control if the LED on the top of the remote
control flashes red.
> Ensure that the product
is activated (power
button/status display
(LED) lights up green).
The LED on the top of the
remote control lights up
white for several seconds
when the connection is
established.
54
> Press the Bluetooth
button/Bluetooth display
(LED) on the product for
several seconds.
> Press and hold the stop
button on the remote
control.
> First press the left
arrow, then press the
right arrow on the
button spray wand posi-
tion.