DURAVIT SensoWash Starck f Notice D'utilisation page 65

Problem
The Rearwash/Ladywash
does not work.
Seat heating
The seat heating does not
work.
The seat temperature is
too high/low.
The seat temperature is
too low.
Warm air dryer
The warm air dryer
temperature is too high/
low.
The warm air dryer stops
automatically.
Potential cause
The seat sensor has lost
contact.
The spray nozzle is
blocked.
The seat sensor has lost
contact.
The function is deactiv-
ated.
The temperature is set
incorrectly.
The product is in energy
saving mode (LED display
lights up orange).
The product automatically
activate energy saving
mode if all functions have
been inactive for more
than 48 hours.
The temperature is set
incorrectly.
The function stops auto-
matically after 5 minutes.
The seat sensor has lost
contact.
Solution
> Sit down again.
> Activate the function.
> Clean the spray nozzle.
[}App] Home – Rear-
wash/Ladywash
> Sit down again.
> Activate the function.
> Activate the function.
[}App] Settings – Seat
> Set the temperature.
[}App] Settings – Seat
> Deactivate energy
saving mode.
[}App] Settings – Seat
> Select any function to
reactivate the product.
> Set the temperature.
[}App] Home – Warm
air dryer
Normal condition
> Sit down again.
> Activate the function.
65