DURAVIT SensoWash Starck f Notice D'utilisation page 52

4.1.2 Remote control with batteries
1
2
> Pull out the battery
compartment.
> Press the lever to fully
open the battery
compartment.
> Remove the protective
film.
4.2 Switch product on
CAUTION
Damage to health caused by dirty, polluted or long standing water
Operating the shower functions with dirty, polluted or long standing water can cause
damage to health.
> If the product has NOT been used for two weeks or more, activate the additional
self-cleaning.
The product must be completely installed and connected to the main power supply
and water supply in accordance with the mounting instructions.
> Ensure that the stop valve is open.
> Switch on the product via the power button/status display (LED).
The LED lights up green. If necessary, the seat unit performs a self-inspection
procedure that can take several minutes.
> In order to test the product, place the splash guard between the ceramic and the
seat.
> Press and hold the seat sensor until a confirmation tone sounds.
> Activate the function Rearwash or Ladywash to test the product.
52
3
> Insert the batteries
(CR2450).
> Close the battery
compartment.
1
2