LENCO PODO-153 Mode D'emploi page 9

files and recorded voice memos when necessary, and to charge the battery.
a. To Connecting Player
• To connect player to your computer, plug the connector of USB Cable into
a USB port on your computer, and connect the other end to player, then
the "Connect" screen appear for view.
• Now the player is ready for media files transfer with your computer and
the battery is charging.
• You can transfer the media files by using the computer mouse use drag
and place, or copy and paste, in between the player and your computer.
Disconnect it when you're done.
b. To Disconnecting Player
It's important not to disconnect player while it's syncing or transferring
files. Eject the player before disconnect it.
• To eject player, press and hold the M button for about 2 seconds, the
"Connect" screen will switch to "Main Menu" screen. And now is safe to
disconnect the player with your computer. Unplug the USB cable from
the player. Or,
• If you're using a Windows PC, you can also eject player in My Computer
or by clicking the "Safely Remove Hardware" icon in the Windows
system tray, select the correspondence name of USB Device and choose
"Stop" > or "Reject" follow by the pop up windows you're your computer.
• If you're using a Mac, you can also eject player by dragging the player
icon on the desktop to the Trash.
• Disconnect the USB cable from the player and computer, simply remove
it.
• If you accidentally disconnect player without ejecting it, reconnect it to
your computer and sync again. However, some media file may loss.
4. Getting Start the Player
Turn ON / OFF the player and use of Main Menu:
• To turn ON the player, press and hold the Center (
seconds, then you will see any one of the following shown Main Menu
screen, Music / Movie / Record /pedometer / Voice / Photo / Setup/
Games / eBook, will appear on LCD after the Loading and Opening
screen have displayed.
• To turn OFF the player, press and hold the Center (
seconds.
9
) button for 3 ~ 4
) button for 3 ~ 4