LENCO PODO-153 Mode D'emploi page 8

Warning:
Better use the original USB cable delivered with your MP3 player. This cable
is a data and charging cable. Some other USB cables in the market are
charging only cables. If you use a charging only cable to transfer data from
your computer to your player, it will only show the battery symbol on the
screen and will not be detected by your computer as an external drive; this
means that you cannot transfer any files from your computer to your MP3
player.
Note :
The player contains a built-in temperature monitor sensor. If it detects that
the battery pack temperature is not within acceptable values, it will control
and stop the charging function. The charging function will automatically
restart when the detected battery pack temperature returns to delete
normal limits.
a. Charging the Battery:
You can charge the player battery in two ways:
• Connect player to your computer. Or,
• Use the USB power charger. (not included)
b. Connection and Charging:
• Once you have connected player with computer / power charger, then
you will see the "Connect" screen appear on screen,
• The level bars are running in battery status icon at the "Connect" screen.
The battery is in charging.
Important: The battery does not charge when your computer is in sleep. The
USB port on most keyboards does not provide enough power to charge the
player. Connect player to a USB port on your computer only to prevent
charge problem.
3. Connecting and Disconnecting Player
You can connect the player with your computer to transfer those media
Connect Screen
In Charging
8