LENCO PODO-153 Mode D'emploi page 31

29. Use Provided LED Blinker Clip
Turn On and Off the LED Blinker clip:
a. To power on the LED Blinker Clip, right rotate the body of it until the LED
in blinking.
b. To power off, left rotate it until the blinking LED to stop.
To replace new battery of LED Blinker clip:
a. Left rotate fully the body of LED Blinker Clip, it front body and back clip
will unlock and separate;
b. Then, take out the battery from back clip and then replace with new
button cell battery;
c. Put it front body and back clip together and then right rotate it will lock.
Note: Make sure that the same type of battery to be used. (Type of Button
Cell Battery: CR927, DC 3V)
Wear LED Blinker Clip
a. You can wear the LED Blinker Clip on your shirt, jacket, or whatever the
location as you desired;
b. However, wear it on our provided armband will be highly recommended.
See picture illustrate show as below for reference:
31