Publicité
Les langues disponibles
Les langues disponibles
Blender
Warning
-
Never reach into the blender jar with your fingers or an object while
the appliance is running.
-
Make sure the blade unit is securely fastened to the blender jar before
you assemble the blender jar onto the motor unit.
-
Do not touch the cutting edges of the blender blade unit when you
clean it. They are very sharp and you could easily cut your fingers on
them.
-
If the blades get stuck, unplug the appliance before you remove the
ingredients that block the blades.
caution
-
Never fill the blender jar with ingredients hotter than 80ºC.
-
To prevent spillage, do not put more than 1.5 litres of liquid in the
blender jar, especially when you process at a high speed. Do not put
more than 1.25 litres in the blender jar when you process hot liquids
or ingredients that tend to foam.
-
If food sticks to the wall of the blender jar, switch off the appliance and
unplug it. Then use a spatula to remove the food from the wall.
-
Never forget to place the sealing ring on the blade unit before you
assemble the lender jar, otherwise leakage will occur.
-
Always make sure the lid is properly closed/assembled on the jar and
the measuring cup is inserted properly in the lid before you switch on
the appliance.
Filter
caution
-
Never use the filter to process ingredients hotter than 80°C.
-
Never overload the filter. Do not put more than 125g of dried soy
beans or 150g of fruit in the filter at the same time.
-
Always make sure the lid is closed/assembled properly and the
measuring cup is inserted properly in the lid before you switch on the
appliance.
-
Cut fruit into smaller pieces before you put it in the filter.
-
Soak dried ingredients, such as soy beans, before you put them in the
filter.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.
Built-in safety lock
This feature ensures that you can only switch on the appliance if you have
properly assembled the blender jar on the motor unit. If the blender jar is
correctly assembled, the built-in safety lock will be unlocked.
EnglisH
7
Publicité
