Bosch KUR15A65 Mode D'emploi page 22

en
Connecting
the appliance
After installing the appliance, wait at least
1 hour until the appliance is switched on.
During transportation the oil in
the compressor may have flowed into
the refrigeration system.
Before switching on the appliance for
the first time, clean the interior of
the appliance (see chapter "Cleaning
the appliance").
Electrical connection
The socket must be near the appliance
and also freely accessible following
installation of the appliance.
m
Warning
Risk of electric shock!
If the length of the mains cable is
inadequate, never use multiple sockets
or extension leads. Instead, please
contact Customer Service for
alternatives.
The appliance complies with protection
class I. Connect the appliance to
220–240 V/50 Hz alternating current via
a correctly installed socket with
protective conductor. The socket must
be protected by a 10 A to 16 A fuse.
For appliances operated in non-
European countries, check whether the
indicated voltage and current type match
the values of your electricity supply. This
information can be found on the rating
plate, Fig. -.
22
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. !
1 Light switch
2 Temperature controller/light
3 Glass shelf in the refrigerator
compartment
4 Pull-out container
5 Vegetable container
6 Ventilation opening
7 Shelf for butter and cheese
8 Egg rack
9 Shelf for large bottles
Switching
the appliance on
Turn temperature controller, Fig. "/A,
from position "0". The appliance begins
to cool. Light is switched on when
the door is open.