Domo DO1113C Mode D'emploi page 28

PARTS
1. Handle
2. Safety lock clip
3. 'On/off' indicator light
4. 'Ready to use' indicator light
5. Unlocking the baking tray to release it
6. Baking trays for toasted sandwiches
7. Baking trays for waffles
8. Baking trays for grilling
BEFORE THE FIRST USE
· Remove all packing materials and carefully clean the appliance before first use (see "Cleaning and
maintenance").
· Attention: when using the appliance for the first time, the baking trays may emit a small amount of
smoke and odour. This is normal. Clean the appliance with absorbent paper or a clean, dry cloth to
remove any residue.
· Place the unit preferably on a surface that is easy to clean. The surface should also be heat-resistant.
Do not place the appliance on an untreated wooden surface.
· Make sure that there is enough ventilation around the grill.
FITTING AND REMOVING THE BAKING TRAYS
1. Remove the mains plug from the wall socket and wait until the appliance has cooled down
completely. Choose the sandwich toaster, waffle tray or grilling tray. Attention: never use the
appliance with only 1 baking tray. Always make sure 2 baking trays are fitted correctly.
2. Place the baking trays in the appliance through the openings provided along the hinge. The baking
trays have a wider end on one side than the other. The wide end should slide into the appliance
along the hinge of the appliance. Then click on the other side.
3. To remove the baking plates from the appliance, slide the release lever out.
28
DO1113C