Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Phenomenon
The running ma-
chine stops sud-
denly
The volume of
juice
is too small
Juice flows out of
the mainframe
There are some
unusual noises
The container and
accessoiries are
dyed after use
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Cause
The power plug is not
properly inserted
The amount of produce
inserted is too high
Hard fruits and vegetables
are not small enough
Continuous working time
exceeding 20 min
Materials may have been
stored in the refrigerator
too long before squeezing
The rubber pad at the bot-
tom of the squeezing cup is
not properly installed
Accessories are not properly
installed
The machine is put on une-
ven or inclined plane
Parts cause extrusion sound
during squeezing
Pulp attaches to the contai-
ner
The container and accesso-
ries are liable to be dyed if
materials with strong pig-
ments (such as carrot, spin-
ach etc.) are used for
squeezing
64
Troubleshooting method
Insert the plug firmly into the
socket
First, press «R» for 2-3 seconds to
let the produce return upwards;
then choose a function and restart
(repeat the process 3 times). If the
machine still does not work, run a
cleaning procedure and start again
Hard fruits and vegetables (such as
carrots) shall only be squeezed af-
ter being cut into strips
Allow the machine to cool down
for 10 min and restart if necessary
The juice amount will be increased
if the materials are squeezed after
being immersed in clear water for
sufficient time
Use fresh fruits or vegetables
Please reinstall the squeezing rub-
ber pad by referring to the installa-
tion method
Inspect whether the accessories
are properly installed after the
machine stops
Please put the machine on a plane
surface
The sound is caused by the extru-
sion of the juice out of fruits and
vegetables: please do not worry
about it
Clean the machine straight after
use
Clean the machine with regular
detergent after use
Publicité
