Rotel SLOWJUICER429CH1 Mode D'emploi page 57

 ASSEMBLY OF THE COMPLETE JUICER
o
Step 1: Install the squeezing cup onto the main body. See the illustration above.
Align the trim strip on the squeezing cup with the trim strip on the main body, in-
sert gently, and then rotate it clockwise.
o
Step 2: Insert the filter in the washing rack.
o
Step 3: Place the auger into the filter. Ensure that the hexagonal axis of the auger
align with the outer hexagonal axis of the motor before inserting it gently and ro-
tate clockwise.
o
Step 4: Insert the filter into the squeezing cup. See the illustration above. Ensure
▲»
the mark «
aligned and push both gently to embed.
o
Step 5: Place the feeding tube on the squeezing cup. As shown on the illustration,
align the mark «
squeezing cup and push it gently to assemble before rotating it clockwise.
o
Step 6: Install both juice cup and pulp cup respectively under the juice outlet and
the pulp outlet.
The illustration is only for assembly purpose, and there may be some differences
with the actual device.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
on the juicing filter and the mark «
▲»
on the cover of the squeezing cup with the mark «
57
▲»
on the squeezing cup are
▲»
on the