Surveillance Mode - Medion S49017 Mode D'emploi

8. Surveillance mode

If the camera receives no input via the operating
buttons for around 90 seconds, the sensor LED will
flash.
The LED sensor will flash quickly after about 110
seconds.
If the camera has not received any input via the
operating buttons for around 120 seconds, it will
automatically switch over to surveillance mode.
8.1.1. Manually stopping the recording
 In order to switch the camera back to playback
mode so that you can operate it, press the
POWER button.
The display switches on.
 Press any button to continue with surveillance.
 Or press the OK button to end surveillance mode.
The camera is now back in playback mode.
NOTE!
Before the camera switches to playback
mode, it saves the last photo/video taken.
Therefore, there may be a delay under
certain circumstances before the camera can
be operated again.
102 of 230