American Standard Colony Pro 7075200 Manuel Du Propriétaire page 5

4
TEST INSTALLED FAUCET
• Remove AERATOR. With handles in OFF position, turn on water supplies and check all connections for
leaks.
• Operate both handles to flush water lines thoroughly. Operate LIFT ROD and check DRAIN for leaks.
Replace AERATOR.
5
SERVICE
If Faucet Drips Proceed As Follows:
• Turn HANDLES in OFF position.
• If spout drips, operate HANDLES several times from OFF to ON position. Do not forc HANDLES they
turn only 90˚.
• AERATOR may accumulate dirt causing distorted and reduced water flow. Remove AERATOR and
rinse clean.
To Change Handle Position:
• Remove INDEX BUTTON (1), HANDLE SCREW (2) and HANDLE (3).
• Remove ADAPTER (4) & RETAINING O-RING (5).
• Lift and turn STOP WASHER (6) 90˚.
• Replace RETAINING O-RING (5) & ADAPTER (4). Replace HANDLE (3).
90°
90°
6
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL
CLOTH. DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH
CLEANERS, OR A CLOTH WITH A COARSE SURFACE.
5
6
1
2
3
4
Aerator