Publicité
Les langues disponibles
Les langues disponibles
9175357
• 6 and 7 mm Nozzles
• Foot pedal
IDENTIFICATION KEY
A.
Cabinet lid
B.
Light switch
C.
Window
D.
(2) Glove port
E.
Light box
F.
(2) Side door
G.
Pressure gauge and regulator
H.
Foot pedal
I.
Metering valve
J.
Media hopper
K.
Abrasive blasting gun
ASSEMBLY & INSTALLATION
1.
Disassemble the packing crate to remove the cabinet body (#22).
•
The grate (#39) is underneath the cardboard at the bottom of the
box.
2.
Remove all the parts from inside the cabinet. Do not disconnect the siphon
hose (#A10), the foot pedal control (#11) or the air regulator (#9). Make sure
they won't be dragged around when you reposition the cabinet.
3.
Remove the lamp box from inside the cabinet and set aside for installation
later.
4.
Place the cabinet on its top.
www.princessauto.com / 1-800-665-8685
ABRASIVE BLASTING CABINET
• Air Regulator
• Cabinet Lighting
V1.1
FIGURE 1.
Page 8
Publicité
