Publicité
Les langues disponibles
Les langues disponibles
9175357
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear protective clothing and gloves designed for the work environment,
materials and tools.
3.
The tool may contain high pressure. Use safety glasses and gloves for
protection during operation. Keep hands clear of the exposed rubber
portions of the hose.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Keep your fingers away from the trigger/switch while carrying the tool or
attaching a hose or accessory. Lock the trigger/switch safety if available.
3.
Avoid unintentional starts. Be sure that the regulator/throttle switch is in
the neutral or OFF position when not in use and before connecting it to
any air source.
SPECIFIC SAFETY
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
Review the safety and operation instructions for the air compressor before
beginning abrasive blasting with this machine.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended
purpose.
2.
Do not attempt to move the unit when the hopper contains abrasive.
www.princessauto.com / 1-800-665-8685
ABRASIVE BLASTING CABINET
V1.1
Page 4
Publicité
