Publicité
Les langues disponibles
Les langues disponibles
V1.1
c.
Do not wrap the air hose around the tool as sharp edges may pierce
or crack the air hose. Gently coil the hose and either hang on a hook
or fasten with a device to keep hose together when storing.
4.
A damaged or disconnected air hose under pressure may whip around and
inflict personal injury or damage the work area. Secure the compressor's
air hose to a fixed or permanent structure with clamps or cable ties.
5.
Install an in-line shutoff valve or regulator to allow immediate control over
the air supply in an emergency, even if a hose is ruptured.
POWER TOOL PRECAUTIONS
1.
Do not use any power tool with a malfunctioning trigger, power switch
or control. A power tool that fails to respond to the controls is dangerous
and can cause an injury. A qualified technician must repair and verify the
power tool is operating correctly, before it can be used.
2.
Shut the power off and disconnect the abrasive blasting cabinet from
the power supply (if possible) before making any adjustments, cleaning,
servicing or when storing. Such preventive safety measures reduce the
risk of starting the tool accidentally.
3.
Avoid unintentional starts. Be sure that the regulator/throttle switch is in
the neutral or OFF position when not in use and before connecting it to
any air source.
4.
Never point towards yourself. It could inflict an injury.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
CONTENTS
Make sure that all items in the contents are included.
• Abrasive Blasting Cabinet
Page 7
ABRASIVE BLASTING CABINET
• Industrial Blast Gun
www.princessauto.com / 1-800-665-8685
9175357
Publicité
