Télécharger Imprimer la page

Beko B7RDNE595LXPW Manuel D'utilisation page 19

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1. *Support Service Key
Press this button for 3 seconds to activate
the support service. Detailed information
on the support service is provided in the
"Support Service Feature" section.
2. *Quick Freezing Key
When the quick freezing key is pressed the
quick freezing symbol shall be illuminated
and the quick freezing function shall be ac-
tivated. The freezer compartment temper-
ature is set to -27 °C. Press the key again to
cancel the function. The quick freezing
function will be automatically cancelled
after 48 hours. To freeze a large amount of
fresh food, press the quick freezing key be-
fore placing the food in the freezer com-
partment.
*Handle Light Function Setting Key
Handle light function might be switched
between open and closed modes by press-
ing the quick freezing key for 3 seconds. In
the closed mode, the handle light is only ac-
tivated when the appliance door is opened
and it goes out after a while after the door
is closed. In the open mode, the handle
light is activated when the appliance door
is opened, the handle light stays on dimly
after a while after the door is closed. The
handle light function is set to the ex-factory
closed mode.
3. Error Condition Indicator
This indicator will be active when your refri-
gerator cannot perform adequate cooling
or in case of any sensor error. "E" will be
displayed on the freezer compartment tem-
perature indicator and figures such as
1,2,3... will be displayed on the cooler com-
partment temperature indicator. These fig-
ures provide information to the authorized
service on the error that has occurred.
Exclamation mark may be displayed for a
while when you load warm food to the
freezer compartment or keep the door open
for a long period of time. This is not a fault,
this warning will be removed when the food
is cooled down or when any key is pressed.
4. Energy Saving (Display Off) Indicator
Energy saving function is enabled automat-
ically and the energy saving symbol lights
up when the door of the product is not
opened or closed for some period of time.
When the energy saving function is active,
all symbols on the screen except the en-
ergy saving symbol will be turned off. When
the energy saving function is active, if you
press any key or open the door, the energy
saving function will be deactivated and the
symbols on the screen will return to nor-
mal. The energy saving function is a func-
tion activated ex-factory and cannot be
cancelled.
5. The Freezer Compartment Temperat-
ure Setting Key
Temperature setting is made for freezer
compartment. Pressing this key will enable
the freezer compartment temperature to be
set at -18,-19,-20,-21,-22,-23,-24 Celsius.
6. *Compartment Conversion Key
Pressing compartment conversion key for 3
seconds, the freezer compartment
switches
between cooler, off, and freezer modes.
If it is operated as the cooler compartment,
the temperature of the compartment will be
set as 4 °C. In the off mode, compartment
temperature indicator shall display "- -".
7. *Deodoriser Module Key
Press this key for 3 seconds to activate/de-
activate the deodoriser feature. When the
deodoriser feature is active, the LED on the
respective key is illuminated. When the fea-
ture is active, the deodoriser module will be
operated periodically.
8. *Cooler Compartment Temperature
Setting Key
Allows setting of temperature for cooler
compartment. Pressing this key will enable
the cooler compartment temperature to be
set at 8, 7, 6, 5, 4, 3, 2 and 1 °C.
EN / 19
EN
IT
FR
RO

Publicité

loading