Télécharger Imprimer la page

Beko B7RDNE595LXPW Manuel D'utilisation page 15

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4.1 Electrical Connection
WARNING: Do not use extension
or multi sockets in power connec-
tion.
WARNING: Damaged power cable
must be replaced by Authorized
Service.
5 Preparation
What to do for energy saving
Read the "Safety Instructions" sec-
tion first.
• This refrigerating appliance is not inten-
ded to be used as a built in appliance.
• Do not keep the refrigerator doors open
for long periods.
• Do not place hot food or beverages into
the refrigerator.
5.1 What To Do For Energy Saving
• Do not overfill the refrigerator; blocking
the internal air flow will reduce cooling
capacity.
• Depending on the product's features; de-
frosting frozen foods in the cooler com-
partment will ensure both energy saving
and preserve food quality.
• Food shall be stored using the drawers in
the cooler compartment in order to en-
sure energy saving and protect food in
better conditions.
• Make sure the foods are not in contact
with the cooler compartment temperat-
ure sensor shown below.
• Our firm will not assume responsibility
for any damages due to usage without
earthing and power connection in compli-
ance with national regulations.
• The power cable plug must be easily ac-
cessible after installation.
Hot surface warning!
The side walls of your product are
equipped with cooler pipes to en-
hance the cooling system. High
pressure fluid may flow through
these surfaces, and cause hot sur-
faces on the side walls. This is nor-
mal and it does not require servi-
cing. Be careful when you contact
these areas.
• Since hot and humid air will not directly
penetrate into your product when the
doors are not opened, your product will
optimize itself in conditions sufficient to
protect your food. Under these circum-
stances, functions and components such
as compressor, fan, heater, defrost, light-
ing, display and so on will operate ac-
cording to the needs by consuming min-
imum energy.
• In case that multiple options are present,
glass shelves must be placed so that the
air outlets at the rear wall are not blocked
and preferably, in a way that air outlets
EN / 15
EN
IT
FR
RO

Publicité

loading