Bradley SN2013/IR Installation page 4

SN2013/IR, SN2033/IR
Rough-In Locations for Wall Anchor Bracing
Dimensions are to determine reinforcement locations. Use fi xture as a template for precise location of 3/8"
Anchors. Dimensions from corner are the same for both walls.
Floor Mounted Units
34-5/16" (872)
30-5/16" (770)
33-9/16" (852)
29-9/16" (751)
Juvenile Height dimensions, where
different, are shown in Italics.
Wall Mounted Units
33-9/16" (852)
29-9/16" (751)
34-5/16" (872)
30-5/16" (770)
4
29-3/4" (756)
25-3/4" (654)
23" (584)
19" (483)
16-3/4" (425)
14-3/4" (375)
3-3/4" (95)
29-3/4" (756)
25-3/4" (654)
23-1/4" (591)
19-1/4" (489)
23" (584)
19" (483)
17-11/16" (449)
13-11/16" (348)
7-12-2010
6-1/8"
(158)
30-1/8" (765)
15-5/16" (389)
4" (102 ) x 4" (102)
110 volt electrical
box (recommended
location: refer to
local codes before
roughing in.)
6"
(152)
13-7/16" (341)
13-11/16" (348)
11-1/2" (292)
12" (305)
6-1/8"
(158)
30-1/8" (765)
15-5/16" (389)
4" (102 ) x 4" (102)
110 volt electrical
box (recommended
location: refer to
6"
local codes before
(152)
roughing in.)
14-3/8" (365)
13-9/16" (344)
Bradley Corporation • 215-923 Rev. H; EN 10-00-015
Installation
(mm)