broda Bari 385 Mode D'emploi page 12

3.2 Seat Tilt Lifting Capacity Adjustment
The seat tilt lifting capacity of the Revive Bari 385 may be configured at one of four settings (see Table/Matrix below),
provided the necessary cylinders are available. To perform this adjustment, the bolts at the following locations must be
manipulated:
Seat Tilt Cylinder Upper Attachment Point (Left/Right)
•
• Seat Tilt Cylinder Lower Attachment Point (Left/Right)
Prior to removing any bolts, please make note of the bolt orientation and the spacers used and reinstall them with the
same orientation and spacers. The bolts have been installed at the factory in a specific manner to maximize strength and
to ensure the smooth operation of the chair.
CYLINDER MOUNTING
POSITIONS
CYLINDER
CONFIGURATION
APPROX APPROX
LIFTING LIFTING
CAPACITY CAPACITY
(KG) (LBS)
61 135
123 270
163 360
184 405
245 540
286 630
327 720
Seat Tilt Cylinder Locations
Seat Tilt Cylinder Upper
Attachment Point
Left/Right
Inside
Left
Outside
Seat Tilt Cylinder Lower
LEFT LEFT
OUTSIDE INSIDE
LEFT LEFT
SLAVE MASTER
CYLINDER CYLINDER
CYLINDER CYLINDER
FORCE (N) FORCE (N)
NONE 300
NONE 600
NONE 800
300 600
600 600
600 800
800 800
10
Right
Outside
Attachment Point
RIGHT
INSIDE OUTSIDE
RIGHT
MASTER
CYLINDER CYLINDER
CYLINDER CYLINDER
FORCE (N) FORCE (N)
300
600
800
600
600
800
800
RIGHT
RIGHT
SLAVE
NONE
Cylinder Style:
NONE
NONE 300N = PAB7
300
600N = PAB 8
600
600
800N = PAB 9
800