Publicité
Les langues disponibles
Les langues disponibles
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
POWER SUPPLY CORD
The power cord contains a device that senses damage to the power cord. To test if the power cord is
working properly:
1. Connect the power supply cord to an electrical outlet.
2. The power supply cord has two buttons located on the head of the plug. One button is marked "Test"
and the other is marked "Reset". Press the "Test" button and the "Reset" button will pop out and click.
3. Press the "Reset" button and a click will sound as the button engages.
4. The power supply cord is now energized and supplying electricity to the appliance.
Notes:
• If the appliance looses power, the reset button may need to be reengaged when the power resumes.
• This button should not be used to turn the appliance on and off.
• The "Reset" button must always be pushed in for correct operation.
• The power supply cord must be replaced if it fails to reset when the "Test" button is pushed in.
POWER RECEPTACLES
These appliances require higher voltage receptacles than standard household receptacles. Consult the table
below to find the required receptacle for your model number.
Model Number
DAC180EB3WDB
DAC250EB3WDB
SAVE THESE INSTRUCTIONS!
Voltage
Receptacle
240
240
Publicité
