Publicité
Les langues disponibles
Les langues disponibles
Advanced operation:
1. Boil water to 40°C, 50°C, 60°C, 70°C, 80°C, 90°C
Press the icon
direction,
40°C, 50°C, 60°C, 70°C, 80°C, 90°C, 100°C will show in cycles on the temperature display. Choose
your desired temperature, the kettle will heat the water to the set temperature and switch off
automatically.
2. Keep warm function:
1)
Press the icon
"100°C" flashs three times, then shows the current temperature; and icon
he kettle will boil water to
light up. T
hours, it will go on heating when the temperature drops to 90
If you want to keep the water warm for 40
2)
Press the icon
warm icon) will light up.
70°C, 80°C, 90°C, 100°C will show in cycles on the temperature display. Choose your desired
temperature, the kettle will heat the water to the set temperature and keep this temperature for 2
hours.
For exampale, if you choose the temperature 40°C. 40°C will flash three times, then shows the current
water temperature. The kettle will start working, and when the water temperature reaches 40°C, the
kettle will switch off and keep temperature at 40°C for 2 hours. During these 2 hours, it will go on
heating when the temperature drops to 35°C.
During 2 hours of keeping warm, the kettle will go on heating if the current water temperature is
below the set temperature (40°C, 50°C, 60°C, 70°C, 80°C, 90°C).
Note:
1)
The kettle can have keep warm function only under above operation way, and if removing the kettle
from its base, the function will be lost and need to reset.
2)
If the keep warm icon
water temperature is higher than the set temperature. The keep warm function will be on when the
water termperature drops to the set temperature.
CLEANING AND MAINTENANCE
1.
Always let the kettle cool down first and disconnect the appliance from the power outlet before cleaning.
2.
Never immerse the kettle area or cord in water, or allow moisture to contact with these parts.
3.
To clean the filter: open the lid and take out the filter, have the filter rinsed under running water and then dry it.
Place it back correctly.
Cleaning appearance of housing:
Wipe the appearance of body with a mild and damp cloth or cleaner, never use a poisonous cleaner.
Never immerse the power base in water or other liquid for cleaning.
Descale regularly, preferably at least once a month and more frequently if your water is very hard.
To descale your kettle, use:
• white vinegar
- fill the kettle with half a litre of vinegar
- leave to stand for 1 hour without heating
• citric acid:
once, the icon
indicates red. Turn the knob in clockwise or anti-clockwire
for 3 seconds, the icon
econds, the icon
for 3 s
Turn the knob in clockwise or anti-clockwise direction,
is flashing, and the set temperature shows in the display, which means the
will indicate red and flash.
100°C, then keep the temperature for 2 hours.
°C, 50°C, 60°C, 70°C, 80°C or 90°C:
will indicate red and flash,
- 6 -
You will find that
(keep warm icon) will
During these 2
°C.
and icon
40°C, 50°C, 60°C,
(keep
5
°C
Publicité
