Festina IFMJS20/55 Manuel D'instructions page 10

STOPWATCH RESET (inc l. after repla cing bat tery )
This procedure should be performed when the stopwatch second hand does not return
to the ZERO second position after the stopwatch has been reset, and including after the
battery has been replaced.
1. Pull the crown out to the 1st Click Position.
2. Press button "A" to set the stop watch second hand to the ZERO position.
* The stopwatch minute hand is syncronized with stopwatch second hand.
* The stop watch second hand can be advanced rapidly by continuously pressing
button "A".
3. Once the hands have been zeroed, reset the time and return the crown to its normal
position.
IFMJS20/55
18
By virtue of the regulations pursuant to the handling of waste products
deriving from electronic and electrical equipment, end of lifecycle watch
making products must be selectively collected for processing. You may
therefore dispose of your quartz watch making products at any of our retail outlets
or any other authorized collection point. The selective collection, processing, rating
and recycling of these products helps contribute to safeguarding the environment
and protecting our health.
19